Gas-Phase Molecular Absorption Spectrometer

ATE8610

The FT-IR Gas Leak Monitor employs advanced passive Fourier Transform Infrared (FT-IR) technology for remote sensing of gas leaks.

Delivery

FOB

minimum order

1 unit

Country of Origin

Made In China

Quantity

Contact Now

Description

The FT-IR Gas Leak Monitor employs advanced passive Fourier Transform Infrared (FT-IR) technology for remote sensing of gas leaks. Constructed from non-adsorbing materials that resist reaction with gaseous pollutants, it ensures longer maintenance cycles and enhanced stability, meeting the demands of real-world applications. This device leverages the temperature difference between the target gas and background, capturing unique infrared spectral fingerprints for rapid, highly sensitive qualitative identification and semi-quantitative concentration analysis of various toxic gases. It displays real-time dynamic distribution and diffusion trends of hazardous gases within the scanned area, providing acoustic and optical alarms for exceeded limits. In scenarios where danger is indeterminate, the FT-IR Gas Leak Monitor enables remote, non-contact risk assessments, mapping hazardous gas distributions and their chemical compositions while tracking diffusion trends, effectively supporting emergency response efforts. For more insights on FT-IR Gas Leak Monitor products and industry trends, consider exploring Optosky solutions in gas leak detection technology.

Features

Automatic sampling, dilution, and detection
Advanced cold trap technology
Automatic water removal system
Real-time monitoring of leakage, temperature, and pressure
Simple operational procedures
Sample volume: 50 ml, supports over 60 samples per run, with detection time of 2-5 minutes per sample
Simultaneous measurement of ammonia nitrogen and nitrite nitrogen content in a single sample.

Application

Drinking Water Production
Petrochemical
Health and Epidemic Prevention
Hydrological Monitoring
Environmental Monitoring
Drainage Network Water Quality Monitoring

Item	Parameter	Description
Optical System	Light Source	Deuterium lamp
	Spectrometer	High-speed fiber optic spectrometer
	Wavelength Range	190-400 nm
	Spectral Resolution	≤0.2 nm
	Wavelength Repeatability	≤0.1 nm
Ammonia Nitrogen	Detection Limit	≤0.02 mg/L
	Range	0.02-100 mg/L (customizable)
	Precision	0.1 mg/L, RSD < 5%; 0.2 mg/L, RSD < 3%; 0.5 mg/L, RSD < 2%
	Linearity Requirements	Automatic or manual configuration of concentrations: 0.0, 0.05, 0.10, 0.20, 0.40, 0.80, 1.0, 2.0 mg/L, correlation coefficient r ≥ 0.9995
	Dilution Function Verification	Configuration concentration of 2.0 mg/L, automatic dilution to standard curve, correlation coefficient r ≥ 0.9995
	Sensitivity	K value ≥ 0.13
	Reagents	1. Concentrated hydrochloric acid (analytical grade or above); 2. Anhydrous ethanol (analytical grade or above); 3. Sodium hydroxide (analytical grade or above);
		4. Potassium bromate (analytical grade or above); 5. Potassium bromide (analytical grade or above); 6. Ammonia nitrogen standard solution
Kjeldahl Nitrogen	Detection Limit	≤0.02 mg/L
	Range	0.1-200 mg/L (customizable)
	Precision	0.1 mg/L, RSD < 5%; 0.2 mg/L, RSD < 3%; 0.5 mg/L, RSD < 2%
	Linearity Requirements	r ≥ 0.9995
	Dilution Function Verification	Configuration concentration of 2.0 mg/L, automatic dilution to standard curve, correlation coefficient r ≥ 0.9995
	Sensitivity	K value ≥ 0.13
	Reagents	1. Concentrated hydrochloric acid (analytical grade or above); 2. Anhydrous ethanol (analytical grade or above); 3. Sodium hydroxide (analytical grade or above);
		4. Potassium sulfate (analytical grade or above); 5. Copper sulfate (analytical grade or above);
		6. Sulfuric acid (analytical grade or above); 7. Potassium bromate (analytical grade or above); 8. Potassium bromide (analytical grade or above); 9. Kjeldahl nitrogen standard solution
Nitrite Nitrogen	Detection Limit	≤0.003 mg/L
	Range	0.012-10 mg/L (customizable)
	Precision	0.1 mg/L, RSD < 5%; 0.2 mg/L, RSD < 3%; 0.5 mg/L, RSD < 2%
	Linearity Requirements	r ≥ 0.9995
	Dilution Function Verification	Configuration concentration of 2.0 mg/L, automatic dilution to standard curve, correlation coefficient r ≥ 0.9995
	Sensitivity	K value ≥ 0.13
	Reagents	1. Concentrated hydrochloric acid (superior grade); 2. Anhydrous ethanol (analytical grade); 3. Nitrite nitrogen standard solution
Nitrate Nitrogen	Detection Limit	≤0.006 mg/L
	Range	0.03-10 mg/L (customizable)
	Precision	0.1 mg/L, RSD < 5%; 0.2 mg/L, RSD < 3%; 0.5 mg/L, RSD < 2%
	Linearity Requirements	r ≥ 0.9995
	Dilution Function Verification	Configuration concentration of 2.0 mg/L, automatic dilution to standard curve, correlation coefficient r ≥ 0.9995
	Sensitivity	K value ≥ 0.13
	Reagents	1. Titanium trichloride; 2. Concentrated hydrochloric acid (superior grade); 3. Nitrate nitrogen standard solution;
		4. Hydrogen peroxide solution (3% medical-grade); 5. Sodium hydroxide; 6. Nitrate nitrogen standard solution
Total Nitrogen	Detection Limit	≤0.05 mg/L
	Range	0.2-100 mg/L (customizable)
	Precision	0.1 mg/L, RSD < 5%; 0.2 mg/L, RSD < 3%; 0.5 mg/L, RSD < 2%
	Linearity Requirements	r ≥ 0.9995
	Dilution Function Verification	Configuration concentration of 2.0 mg/L, automatic dilution to standard curve, correlation coefficient r ≥ 0.9995
	Sensitivity	K value ≥ 0.13
	Reagents	1. Titanium trichloride; 2. Concentrated hydrochloric acid (analytical grade or above); 3. Potassium persulfate (Sigma);
		4. Sodium tetraborate decahydrate; 5. Total nitrogen standard solution;
		6. Hydrogen peroxide solution (3% medical-grade); 7. Sodium hydroxide; 8. Total nitrogen standard solution
Sulfide	Detection Limit	≤0.005 mg/L
	Range	0.02-10 mg/L (customizable)
	Precision	0.1 mg/L, RSD < 5%; 0.2 mg/L, RSD < 3%; 0.5 mg/L, RSD < 2%
	Linearity Requirements	r ≥ 0.9995
	Dilution Function Verification	Configuration concentration of 2.0 mg/L, automatic dilution to standard curve, correlation coefficient r ≥ 0.9995
	Sensitivity	K value ≥ 0.13
	Reagents	1. Phosphoric acid (superior grade); 2. Sodium hydroxide; 3. Sulfide standard solution (Ministry of Ecology); 4. Sulfide standard solution